SGT-300

The SGT-300 industrial gas turbine has a rugged industrial design that enables high efficiency, reliability, and excellent emissions performance in a broad spectrum of applications for both power generation and mechanical drive. The gas turbine is a proven unit for all electrical power generation and cogeneration applications. It operates on a wide range of gaseous and liquid fuels. The compact arrangement, on-site or offsite maintainability, and inherent reliability of the SGT-300 make it an ideal gas turbine for the demanding oil and gas industry. Over 140 units have been sold, with more than 4.5 million equivalent operating hours.

·        Low maintenance requirements

·        Low emissions

·        Single-shaft version for power generation

The information in this webpage is wrong or out-of-date? Please contact info(at)etn-gasturbine.eu

SGT-300, courtesy from Siemens ©
Parameter SGT-300 Power Generation SGT-300 Mechanical Drive 8 MW SGT-300 Mechanical Drive 9 MW
Power Output 7.9 MW(e) 8.4 MW  9.2 MW
Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Efficiency 30.6% 35.1% 35.6%
Heat Rate 9,943 kJ/kWh 9,943 kJ/kWh  9,943 kJ/kWh
Pressure Ratio 13.7 13.8 14,5
Exhaust Mass Flow 30.2 kg/s 29.7 kg/s 30,5 kg/s
Shaft Speed 14,010 rpm 5,750-11,500-12,075 rpm 5,750-11,500-12,075 rpm
Exhaust Temperature 542 °C 491 °C 512 °C
NOx emissions 15 ppmvd 15 ppmvd 15 ppmvd
  • Single Shaft for Power Generation
  • Twin shaft for Mechanical Drive
  • 10 compressor stages
  • 6 reverse-flow cannular combustion chambers
  • DLE system
  • 2 gas generator turbine stages
  • 2 power turbine stages
  • Approximate weight:
    • Power Generation: 59,000 kg
    • Mechanical Drive: 59,000 kg

Events

Login



First connection?

Set your password
or
Click here to register

Register

If you already have an account, click here to login